323 Series Options/Accessories
| BACK HOME |
| Click on thumbnail to view larger image. |
| Mounting kits are available for pressure and or
temperature. Optional kits include valve, tubing, fittings, test fitting,
mounting screws and gasket. Stainless steel thermowells are also available in
all sizes and configurations. |
 |
Easy to install internal modem kits are available for all 3 series RECOR volume
correctors. Listed Class 1 Division 2, the 2400 baud modem is AT command
configurable and provides up to two years of operation on the 12 volt alkaline
power pack (included in kit). Optional surge protectors offer insurance against
transients. Click here to go to the modem specifications
page. Click here to view or print the instructions for installing the internal
modem retro kit. |
 |
All RECOR electronic
instruments are designed for shared modem capability. Multidrop applications
require a special harness for "daisy chaining" instruments. On internal modem
equipped instruments the harness is installed in the "master" unit and a
terminal strip is provided for connecting the "slaves". Multidrop applications
involving more than four units may require a separate terminal box. Click here
to view or print a multidrop wiring
diagram. |
|
The RECOR 323 LVC HF is designed for direct connection to
high frequency output turbine meters. A yoke is available that allows for the
instrument to mount directly to the pickup coil stem of the meter. The ultra low
power preamp is scaleable for use with mini and larger size meters,
accommodating k-factors up to 9,999. Click here to view the complete LVC 323 HF unit. Click here for the LVC HF Manual. |
The RECOR 323 LVC (LF) is designed to accept a low frequency pulse input from a
remote source or integral pulse equipped meters. A panel mount or 2" pipe collar
mounting bracket is available. Click here for the LVC LF
Manual.
|
 |
The Pulse Splitter option board is available
for converting the standard Form "A" uncorrected and corrected volume pulse
outputs of the 323 LVC to Form "C". The Form "C" output can be utilized when two
of each pulse are required. Click here for the Form C Manual.
The "Nertec" Pulse Isolator option board provides opto-isolation of the standard
323 LVC pulse outputs, a characteristic required for Nertec brand pulse
recorders (such as the 401 and 402) Click here for the Pulse Isolator Wire
Diagram. |
The LVC External Power Adapter is available for hard wiring and external power
source to the 323 LVC electronic volume correctors. Click here to view or print
the External Power Adapter
Wire Diagram.
|
 | Reliable remote pulse generators feature rotate-able
universal base plate and eight digit uncorrected odometer style index. Form A or
Form C reed switch based pulse wired to screw terminal inside weatherproof
housing. |
 | Thanks to effective customer communications, the MicroT probe
was born. In an effort to reduce installation cost on rotary meters a Pete's
Plug gauge adapter was modified to accept the LVC temp sensor. The little probe
fits into any standard Pete's Plug, eliminating the need for an expensive
thermowell. |
| Earlier ('97 - '98) RECOR 323 LVC correctors can be easily upgraded from the
original flexible drive cable to the Heavy Duty Mechanical Index Assembly. These
are available in either 5 or 10 foot drive rates. Click here to view or print
the HD Index Retro Kit Instructions. |
| |
| |
